Install Unigine 2 Sim Kit.
Install CIGI Demo (using the Unigine SDK Browser)
Run the demo.
Set the IP to the local machine (127.0.0.1 may not work, use the real IP)
Set Host receiving port to 8889 and the IG receiving port to 8888.
Then Connect
Open vsTASKER.
Load the demo_cigi database in /Data/Db/CIGI
Compile the database (or just load the SIM if already compiled)
vsTASKER console should display the following lines:
Unigine Console should display the following lines:
Then start the simulation.
When the B-200 aircraft is flying and simulation RTC is running at 30hz, click on the aircraft symbol.
The IG now has the camera focused on the aircraft. If you are using a gamepad, just use the triggers to zoom in/out.
Left thumb stick moves the camera around.
